This Defensive Driving course is a 1 day program that meets all of the requirements to receive a Statement of Attainment, upon successful completion for the Nationally Recognised Training course
TLIC3036 – Apply Safe Car Driving Behaviours
TLIC1051 – Operate Commercial Vehicle
Driving a motor vehicle is considered a high to extreme risk activity. Driving a 4WD vehicle off road increases this risk further. For most people the operation of a vehicle becomes routine and therefore the risk of this activity is very seldom considered.
On average, four to five people are killed every day on Australian roads and over 220 people are hospitalised as a result of road incidents.
A4ADE Apply Safe Car Driving Behaviours Course incorporates high-level safe driving skill and knowledge required by all drivers to enable them to adopt safe driving behaviours. These are higher order skills, such as hazard perception, judgement, decision making, multi-tasking, risk control and safe driving attitudes across a range of vehicles and driving situations.
Australian 4WD & Advanced Driver Training has designed a ‘Drive Safely Training Program’, incorporating Low Risk Defensive Driving and Apply Safe Car Driving Behaviours. This program is suitable for those driving both on and off road, and is something that should be considered by anyone driving a motor vehicle.
Defensive Driving Skills ~ It doesn’t matter if you drive a small sedan, large family vehicle, sports car or four wheel drive vehicle Low Risk Defensive Driving skills tuition is relevant for all vehicles and ability levels. Young drivers are strongly encouraged to develop solid driving techniques and the more experienced drivers will benefit by correcting old habits and improving judgment and reactions.
Our very experience and professional trainers will teach you vehicle mastery and control by simulating everyday driving conditions and emergency situations that could confront you on the any road surfaces.
We are passionate about equipping drivers with low-risk defensive driving skills enabling them to become safer and more effective crash-free defensive drivers.
Who would select this course?
This course is has been developed and contextualised for any employee that is required to drive a company or commercial vehicle/s as part of their day-to-day driving duties.
This course is appropriate for all industries which is designed to cover a higher level of knowledge of safe driving behaviour, high order skills, risk control, safe driving judgment, decision making and multi taking.
The responsibility of all drivers of a company or commercial vehicle is to drive in such a way as to prevent being involved in an vehicle incident regardless of the action of other drivers or adverse driving conditions.
Goal of zero incidents:
A4ADE fully acknowledge that companies and organisations strive to meet the goal of zero incidents and injuries and are committed to eliminating vehicle incidents involving their employees and contractors.
A4ADE specific Apply Safe Car Driving Behaviours elements support this goal by including, but not limiting to the following teaching elements, (In addition to the Nationally Recognised elements, listed below):
- Drivers behaviour, attitude, decision making, distractions, road rage;
- Commentary Drive – Low Risk Defensive Driving Techniques, driver scanning, driving hazards (What is the actual driving risk, What is the potential driving dangers and What is the drivers actions to avoid a vehicle crash), travelling/following distances, accident avoidance (techniques on avoiding crashes with animals / wildlife, crashes at intersections, rollovers, country and rural areas, gravel and wet road condition etc);
- Practical drivers seating position (set up for action – not rest), vehicle and Tyre Changing;
- Vehicle dynamics (difference with vehicle specific, such as: 2WD rear wheel and front wheel drives, 4WD, coaster vehicle).
- Steering and corning techniques, skid control and avoiding vehicle roll over;
- Individual driver practical assessment, National Road Rules Assessment, Road rules incorporating defensive driving and courtesy driving.
- Emergency procedures (tyre blowout, brake failure);
- Fatigue Management, Drugs and Alcohol effects (A4ADE videos follows true/real stories of family members who have lost loved ones through driver fatigue and alcohol) and Journey Management Plan (practical exercises with map reading and emergency response call);
- Emergency braking techniques (ABS and threshold, concrete slab and gravel surfaces), Drivers perception phases, reaction time and vehicles stopping distances. A number of braking exercises on concrete and gravel surfaces, at different speeds and different scenarios.
- Tyres (types, capabilities & limitation in a defensive driving role). Reversing a vehicle.
- Towing trailers (Qld towing legislation, loading, ATM vs GTM, ball weight, safety chains, trailer brakes, swaying (what causes and action to avoid), load distribution, hitching and unhitching procedure.
- A Low range activity to familiarise drivers on the differences between 4WD high range and 4WD low range, if required.
- Company specific Light Vehicle policy.
Course Elements for PMASUP236 Operate Vehicles in the Field,
are as follows:
Prepare vehicle and secure load
1.1 Conduct vehicle familiarisation checks before starting journey.
1.2 Note and rectify any defects where possible or report vehicle for further attention/repair.
1.3 Ascertain that all required fuel, water and other supplies required for the journey are available and in useable order.
1.4 Inspect all ancillary equipment and operational accessories to ensure they have been attached or secured in a safe and agreed manner.
1.5 Secure load including external loads, rear tray, roof racks, and any loads within the vehicle, using appropriate securing equipment.
2.1 Familiarise oneself with the route to ensure that an appropriate route has been determined.
2.2 Interpret access manuals and topographical maps in order to obtain required information for journey.
2.3 Obtain relevant authorisations/notifications and accesses before starting the journey.
2.4 Confirm and/or clarify or communicate journey details with relevant company personnel.
2.5 Monitor driving conditions and requirements constantly, to meet any changes in terrain, weather conditions and road conditions and requirements.
2.6 Monitor and maintain fluid levels and air pressures to ensure safe and efficient vehicle operations.
2.7 Monitor vehicle constantly for any malfunctions or factors that may affect vehicle performance.
2.8 Maintain vehicle speeds within all stated limits and road condition limitations to minimise the risk of personal injury, environmental damage and load damage.
2.9 Maintain communication as required with the relevant company personnel to advise of progress and journey status.
2.10 Ensure seatbelts are worn by all personnel while the vehicle is in motion.
3.1 Knowledge of vehicle differences to the driving requirements of 4WD and conventional vehicles.
3.2 Adhere to general principles of 4WD in negotiating a variety of terrains and driving conditions.
3.3 Use defensive driving techniques.
3.4 Observe additional precautions for night driving.
3.5 Drive to suit road conditions.
3.6 Observe rules prohibiting driving under the influence of alcohol and other performance inhibiting substances.
4.1 Communicate and confirm termination of journey with the relevant company personnel.
4.2 Visually inspect the vehicle to ensure that vehicle is in good repair and order.
4.3 Unsecure trailer loads and prepare for unloading utilising the agreed uncoupling process.
4.4 Report faults or damage to vehicle to appropriate personnel.
5.1 Identify and assess options for recovery of an immobilised vehicle.
5.2 Operate recovery equipment safely.
5.3 Perform a battery ‘jump start’ safely.
5.4 Observe safety precautions when rigging cables and chains.
5.5 Demonstrate various methods of vehicle recovery.
5.6 Change a wheel on a properly jacked vehicle.
Maintain vehicle safety
6.1 Observe appropriate speeds for the road conditions.
6.2 Ensure all personnel use a seat belt.
6.3 Observe site specific vehicle entry restrictions.
6.4 Follow appropriate search and rescue notification procedures.
6.5 Follow appropriate procedures for passing large or heavy vehicles.
Make Specific Course:
Australian 4WD & Advanced Driver Education are specialists in on and off road Defensive Driver Training and are able to design, develop and conduct “make-specific” courses. Our “make-specific” courses not only cover all mandatory Nationally Recognised elements for the PMASUP236 but are contextualised to ensure they meet the specific requirements of the Employer and their staff.
Additional course information.
The PMASUP236 is a 2 day course with start and finish times as follows:
Commencement 07:45, concluding at approximately 3:30pm.
Commencement 07:45, concluding at approximately 1pm.
It can be delivered in one long day, commencing at 6:45 concluded at approximately 5pm.
A4ADE Practical Training Area
A4ADE exclusive Driver Training Facilities at Kurwongbah and Kogan offers terrain which is similar to the terrain that people would be required to drive on in their everyday driving as part of their job. This offers superior opportunities for the development of skills and techniques in these environments rather than a simulated environment or a “make-shift” area artificially developed for driver training.
A4ADE Training Areas:
A4ADE have exclusive Driver Training Facilities at Kurwongbah, North of Brisbane and Kogan, between Dalby and Chinchilla.
For group bookings additional training areas to those listed above include Cairns, Townsville, Mackay, Rockhampton, Gladstone, Mt Isa, Moranbah, Roma, Toowoomba, however not limited to these areas.
Australian 4WD & Advanced Driver Education specialise in the design and implementation of client specific and site specific driver training and education. Training can be delivered for groups on any site (if suitable terrain is available), for group bookings. All courses are portable allowing staff to be trained in locations familiar to their day-to-day use of 4WD and other light vehicles and can be delivered to ensure minimal disruption to shift routine.
Corporate/Group Booking Training Areas:
A4ADE are able to plan, develop and deliver specific course programs for groups or corporate, on request.
What course participants will require to undertake the course:
- USI (Unique Student Identifier)
- 4WD Vehicle (one vehicle can be used for up to 2 participants from the same organisation:
- Should you not have access to a 4WD vehicle, A4ADE fleet vehicles are available for use at an additional cost. (please see “vehicles” below”); and
- Your vehicle will need at least half a tank of fuel.
- Driving license (that will be required for checking prior to course commencement).
- Appropriate clothing – this should be compliant with your companies policy however at a minimum must comprise of long sleeved shirt, long pants, closed shoes with good soles and hat.
- Sunscreen and insect repellent.
- Pad and pen.
- Morning tea and a light lunch with plenty of drinking water in summer months.
A4ADE do have vehicles available for use. The cost of these vehicles includes, vehicle hire for completion of the course, fuel, recovery equipment (where required), cleaning and wear/tear on brakes and tyres.
Vehicle hire fee: 1 day vehicle hire is $135.00 per person, per day.
The hire cost of A4ADE 6 x 4 box trailer is $80.00 per trailer.